Mobile showers

Portable shower

8620.01.10_20
Portable shower 12 V


8630.05.10_20
Portable shower 24 V

set 12 V consists of:

  • submersible pump (power: 12 l/min, pressure 0,6 bar, consumption: 18-24 V)
  • shower head (suppressible, steady flow of water)
  • 2 m shower hose
  • coiled cable about 4 m and 12 volt plug
  • 20 l foulding jerry can 290 x 290 x 320 mm (W / D / H)
  • packed in a handy plastic case (dimensions W / H / T: 320 x 280 x 119 mm)

Spiral mobile shower 12 / 24 volt

8623.01.00
Spiral mobile shower 12 V

8633.06.05_00
Spiral mobile shower 24 V


fits in every canister with wide neck DIN 96

set consists 12 V of:

  • submersible pump (power: 12 l/min, pressure 0,6 bar, consumption: 18-24 V)
  • coiled cable about 4 m and 12 volt plug
  • shower head (suppressible, steady flow of water) with coiled hose stretchable up to 2 m
  • plastic case

Mobile shower 12 / 24 volt

set consists of:

  • submersible 12 or 24 Volt
    (power: 12 bzw. 18 l/min, pressure 0,6 bar, consumption: 18-24 W (SOLO) / 35-45 W (DUO))
  • coiled cord about 4 m and plug
  • shower head (suppressible, steady flow of water) with 2 m hose which is housed in the 20 l wide neck canister (can be pulled out easily)
  • plastic case or canister

dimemsions of 20 l canister W / D / H: 290 x 255 x 390 mm

Mobile shower 12 Volt

article code 
8620.06.20_20 SOLOpump 12 V (power: 12 l/min; 0,6 bar) with 20 l canister
8620.01.00 SOLOpump 12 V (power: 12 l/min; 0,6 bar) without canister, in plastic case
8621.06.20_20 DUOpump 12 V (power: 18 l/min; 1 bar) with 20 l canister



Mobile shower 24 Volt

article code 
8630.06.20_20 SOLOpump 24 V (power: 12 l/min; 0,6 bar) with 20 l canister
8631.01.00 SOLOpump 24 V (power: 12 l/min; 0,6 bar) without canister, in plastic case
8631.06.20_20 DUOpump 24 V (power: 18 l/min; 1 bar) with 20 l canister

Attention!

  • motor of the pump is running when the plug is inserted into the socket
  • unpluged the pump immedlatly after use
  • prevent the pump from running dry;  only use the mobile shower when is water filles
  • protect the system from frost
  • prevent canister against tip over

Shower head for water plug

8634.05.00
Shower head for water plug

set consists of:

  • nylon flex hose and trigger, with brass quick coupling; Nylon flex hose extendable to 200 cm
  • shower head (suppressible, steady flow of water or pulser) with cone 1/2"
  • plastic case

Shower supply set 12 volt

8652.13.00
Shower supply set 12 volt

complete with undertable faucet
for wide neck canister DIN 96

set consists of:

  • 1 battery box for 2 pieces of 6-volt batteries (w/o batteries) including plug and socket
  • 1 submersible pump VIP-PLUS 12 v, flow rate 18 l/min, pressure 1 bar, CE-shielded, dry-running seal, including plug and socket
  • 1 undertable faucet LONDON white with microswitch, with plug and socket (up to 1.5 bar)
  • 1 shower set: hand shower LONDON white (jet / spray / close), shower hose open - 1.5 m  - 3/8"-nut, table flange and wall mount
  • 2 m extension cable with plug and socket
  • 2 m PVC-hose with 2 hose clamps
  • 1 screw ring and dust cap for wide neck canister DIN 96
  • plastic case

Installation

  1. install the faucet in the designated position and fix it with a nut; bore hole 20 mm, attach control button; install table flange in the designated position
  2. attach PVC hose to the water inlet hosetail at the side of the faucet and fix it with the hose clamp
  3. attach the free end of the PVC hose to the submersible pump and fix it with the hose clamp
  4. attach shower hose from the top through the table flange; fix it at the water outlet hosetail at the bottom of the faucet; do not forget the seal
  5. install the wall bracket

 

Wiring

  1. connect the plug of the battery box into socket of the faucet
  2. connect the plug of the faucet into the socket of the submersible pump
  3. connect the plug of the submersible pump into the socket of the battery box